Toshiba TECRA R10 - Membrane Sw

4.27 MEMBRANE SW 4 Replacement Procedure
4.27 MEMBRANE SW
Removing the MEMBRANE SW
To remove the MEMBRANE SW, follow the steps below and refer to Figure 4-39 to 4-41.
1. Peel off the INSU BTN COV HLD.
2. Remove the BUTTON COV ASSY.
INSU BTN COV HLD
BUTTON COV ASSY
Figure 4-39 Removing the MEMBRANE SW (1)
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-67