Toshiba TECRA R10 - Speaker Assy

4 Replacement Procedure 4.25 SPEAKER ASSY
4.25 SPEAKER ASSY
Removing the SPEAKER ASSY
To remove the SPEAKER ASSY, follow the steps below and refer to Figure 4-36 to 4-37.
1. Slide the HARNESS HOLDER L in the direction as shown below to remove it.
NOTE: There are four latches. They are released by sliding the HARNESS HOLDER L
in the direction as shown below.
HARNESS HOLDER L
Figure 4-36 Removing the speaker (1)
4-62 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)