4.30 CAMERA MODULE/Antenna 4 Replacement Procedure
4.30 CAMERA MODULE/Antenna
Removing the CAMERA MODULE/Antenna
To remove the CAMERA MODULE/Antenna, follow the steps below and refer to Figure 4-
51 to 4-52.
1. Peel the INSU ANT HOLD S fixing the CAMERA HARNESS. (only for CAMERA
model)
2. Peel off the CAMERA MODULE from the LCD COVER ASSY.
3. Disconnect the CAMERA HARNESS from the CAMERA MODULE.
CAMERA MODULE
CAMERA HARNESS
INSU ANT HOLD S
Figure 4-51 Removing the CAMERA MODULE/Antenna (1)
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-79
To Next Page
Loading...
