Toshiba TECRA R10 - Expresscard

4 Replacement Procedures 4.4 ExpressCard
4.4 ExpressCard
Removing the ExpressCard
To remove the ExpressCard, follow the steps below and refer to Figure 4-3
CAUTION: Insert or remove an ExpressCard in accordance with any instructions in the
ExpressCard manual or the manuals of the computer system you are using.
1. Press the ExpressCard in order to eject the ExpressCard partially out of the computer.
2. Grasp the ExpressCard and pull it out.
ExpressCard
Figure 4-3 Removing the ExpressCard
Installing the ExpressCard
To install the ExpressCard, follow the steps below and refer to Figure 4-3.
1. Insert the ExpressCard into the ExpressCard slot.
2. Press ExpressCard carefully to ensure a firm connection.
4-14 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)