3 Tests and Diagnostics 3.32 SETUP
3-94 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)
(b) PCI Express Link ASPM
This option set the power-saving function of PCI Express on the following
conditions.
Auto PCI Express devices are not used while battery
operation. (Default)
Disabled Disable the Power-saving function and drive
with maximum performance.
Enabled PCI Express devices are not used.
(c) Enhanced C-States
*Core2 model only
This option set the power-saving function of Enhanced C-States on the
following conditions.
Enabled This lowers the power consumption. (Default)
Disabled This does not lower the power consumption.
9. Drives I/O
This option displays the address and interrupts level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
(a) Built-in HDD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port0
(b) ODD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port1
(c) eSATA
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port4
To Next Page
Loading...
