4 Replacement Procedure 4.25 SPEAKER ASSY
4-64 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)
Installing the Speaker
To install the speaker, follow the steps below and refer to Figure 4-36 to 4-37.
1. Set the right and left speaker of SPEAKER ASSY into the slots.
CAUTION: When setting the SPEAKER ASSY, do not crush the cushion.
2. Set the SPEAKER PLTs on the right and left speakers of SPEAKER ASSY.
3. Arrange the harness of SPEAKER ASSY in place and stick acetate tapes in place to
fix the speaker harness.
4. Install the HARNESS HOLDER L while sliding it in the opposite direction when
removing.
To Next Page
Loading...
