4 Replacement Procedure 4.28 TOUCH PAD/Fingerprint sensor board
7. Remove the following screws and peel off the Fingerprint sensor board.
• M2.0×4C S-THIN HEAD × 2
8. Remove the TP SPILL CUSHION from the Fingerprint sensor board.
9. Remove the D STICK TAPE TP.
M2.0x4C S-THIN HEAD
TP SPILL CUSHION
Fingerprint sensor
board
D STICK TAPE TP
Figure 4-45 Removing the TOUCH PAD /Fingerprint sensor board (4)
4-72 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)
To Next Page
Loading...
