E6581528
E-36
5
An example of setting when =
Synchronized deceleration if a synchronized acceleration/deceleration signal is impressed or if a power failure
occurs, or synchronized acceleration if the synchronized acceleration/deceleration signal is canceled.
Motor speed
Time
Synchronized
acceleration/dece
leration signal
(S1 terminal)
Inverter 1
Inverter 2
ON
Input voltage
*1
*1: Internal main circuit voltage of the inverter is controlled between and at =, ,
The motor becomes coasting stop when the main circuit voltage becomes or less. Therefore please decrease
or increase when becoming MOFF immediately after the power failure.
To Next Page
Loading...
Need help?
General