E6581528
A-3
1
The default setting of all products is 575V-60Hz.
You can change it to other voltage class Inverter(500V-50Hz or 690V-50Hz) by changing the "" parameter.
Title Function Adjustment range Default setting
Factory default setting
: -
: 500V-50Hz default setting
: 575V-60Hz default setting
: 690V-50Hz default setting
Please refer to Chapter 11 Table of parameters for the changed parameters by the setting.
[ Instance setting : Set to 690V-50Hz ]
Key operated LED display Operation
Displays the operation frequency. (Perform during operation stopped.)
(When standard monitor display selection =[Output
frequency])
Displays the first basic parameter “History function ().”
Press either the or key to select “.”
Press the ENTER key to display the parameter setting (Default
setting:).
Press the key to change the parameter to.
The parameter value is written. After set it, “” is displayed
for a while and the display disappears momentarily, it becomes
“” displays.
MODE
ENT
ENT
To Next Page
Loading...
