EasyManua.ls Logo

Toshiba TOSVERT VF-AS1 - Page 223

Toshiba TOSVERT VF-AS1
328 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E6581528
H-4
8
Input terminal information
Input terminal 1 (F) :

: 0
Input terminal 2 (R) :

: 1 When there is signal input
-: -: -
Input terminal 4 (RES) :

: 3 When there is no signal input
Input terminal 5 (S1) :

: 4 (blank in the upper half)
Input terminal 6 (S2) :

: 5
Input terminal 7 (S3) :

: 6
Input terminal 8 (RR/S4) :

: 7
Data bit of communication
No. FE06
Input terminal 9 (LI1) :

: 8 When there is signal input
Input terminal 10 (LI2) :

: 9
Input terminal 11 (LI3) :

: 10 When there is no signal input
Input terminal 12 (LI4) :

: 11 (blank in the upper half)
Input terminal 13 (LI5) :

: 12 When there is signal input
Input terminal 14 (LI6) :

: 13
Input terminal 15 (LI7) :

: 14 When there is no signal input
Input terminal 16 (LI8) :

: 15 (blank in the upper half)
Input terminal 9 to 16 : Expansion terminal board option unit
Add-on option
Note: When  is set at a number of to expansion terminal board option input terminal information (,
) indicate information of lower 8 bit terminal (B0~B7).
Output terminal information
Output terminal 1 (OUT1) :

: 1 When there is signal output
Output terminal 2 (OUT2) :

: 2
Output terminal 3 (FL) :

: 3 When there is no signal output
(blank in the upper half)
Data bit of communicatio
n
No. FE07
Output terminal 4 (OUT3) :

: 4
Output terminal 5 (OUT4) :

: 5
Output terminal 6 (R1) :

: 6 When there is signal output
Output terminal 7 (OUT5) :

: 7
Output terminal 8 (OUT6) :

: 8 When there is no signal output
Output terminal 9 (R2) :

: 9 (blank in the upper half)
Output terminal 10 (R3) :

: 10
Output terminal 11 (R4) :

: 11
Output terminal 4, 5, 6 (OUT3, OUT4, R1) :Expansion terminal board
option unit 1
Output terminal 7, 8, 9 (OUT5, OUT6, R2) :Expansion terminal board
option unit 2
Output terminal 10, 11 (R3, R4) :16-bit BIN/BCD option
Add-on option
Cumulative operation time
For indication of cumulative operation hours, running hours are counted up when the output frequency monitor
reads a frequency other than 0.0Hz. 10 hours is indicated as 0.1 (unit of Indication).

Table of Contents

Other manuals for Toshiba TOSVERT VF-AS1

Related product manuals