9
Chapter 2
Connect the Hardware
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device’s screen.
2 ) Immediately press the WPS button on your router.
3 ) The Wi-Fi LED flashes for about 2 minutes during the WPS process.
4 ) When the Wi-Fi LED is on, the client device has successfully connected to the
router.
To Next Page
Loading...
