63
View System Logs
In the Log section, you can click to refresh the logs and view them in the table.
Configure the Way of Receiving Logs
In the Log Settings section, you can configure the ways of receiving system logs.
Follow the steps below to configure this feature:
1. Check the corresponding box to enable one or more ways of receiving system logs,
and configure the related parameters. Three ways are available:
Auto Mail
,
Server
and
Nvram
.
Auto Mail
If Auto Mail is configured, system logs will be sent to a specified mailbox. Check the box
to enable the feature and configure the related parameters.
To Next Page
Loading...
