78
Chapter 11
Manage Your Router
3. Enable Remote Management and Remote Management via HTTPS to allow for
HTTPS connection. Keep the Port as the default setting.
4. Set the client device allowed for remote management. Select All to allow all remote
devices to manage the router. If you just want to allow a specific device to manage
the router, select Only the Following IP/MAC Address and enter the IP/MAC address
of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the Manage This Router via the Address field to manage the
router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click Trust (or a
similar option) to continue. To avoid this warning, you can download and install the certificate on the router’s web
management page at Advanced > System Tools > Administration.
2. The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log
in to the router through a domain name.
11. 6. 4. HTTP Referer Head Check
HTTP referer header check function can protect your networks against CSRF attacks.
This function is enabled by default. You can disable this function if needed.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > Administration, and locate the HTTP Referer
Head Check section.
To Next Page
Loading...
Need help?
General
