74
Chapter 11
Manage Your Router
11. 4. Back Up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the router to a
previous settings from the backup file when needed. Moreover, if needed you can erase
the current settings and reset the router to its default factory settings.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > Backup & Restore.
¾ To back up configuration settings:
Click Backup to save a copy of the current settings to your local computer. A conf.bin
file will be stored to your computer.
¾ To restore configuration settings:
1 ) Click Browse to locate the backup configuration file stored on your computer,
and click Restore.
2 ) Wait a few seconds for the restoring and rebooting.
¾ To reset the router to factory default settings:
1 ) Locate the Factory Default Restore section, and click Factory Restore to reset
the router.
2 ) Wait a few seconds for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the router.
2. We strongly recommend you back up the current configuration settings before resetting the router.
To Next Page
Loading...
Need help?
General
