83
Chapter 11
Manage Your Router
• SNMP Agent/SNMP Agent for WAN: Turn on to enable the built-in SNMP agent that
allows the router to operate as the operational role in receiving and processing of
SNMP messages, sending responses to the SNMP manager, and triggering SNMP
traps when an event occurs.
• Read-only Community: Displays the default public community string that protects the
router from unauthorized access.
• Write Community: Displays the default write community string that protects the router
from unauthorized changes.
• System Name: Displays the administratively-assigned name for this managed device.
• System Description: Displays the textual description of the managed device. This
value should include the full name and version identification of the system’s hardware
type, software operating-system, and networking software.
• System Location: Displays the physical location of this device (for example, the
telephone closet, 3rd floor).
• System Contact: Displays the textual identification of the contact person for this
managed device, together with information on how to contact this person.
• Trap Manager IP: Displays the IP address of the host to receive the traps.
You are suggested to keep the default settings. Click Save to make the settings effective.
11. 10. Monitor the Internet Traffic Statistics
The traffic statistics function allows you to monitor the volume of internet traffic
statistics. You can view the network traffic of the LAN, WAN and WLAN sent and
received packets.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
To Next Page
Loading...
Need help?
General
