TP-Link EC120-F5 - CWMP Settings

81
Chapter 11 Manage Your Router
11. 8. CWMP Settings
The router supports CWMP (CPE WAN Management Protocol), also called TR-069. This
collects information, performs diagnostics and configures the devices automatically
via ACS (Auto-Configuration Server).
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System Tools > CWMP Settings page.
• CWMP: Enable or disable the CWMP (CPE WAN Management Protocol) function.
• Inform: Enable or disable the function of sending an inform message to the ACS (Auto
Configuration Server) periodically.
• Inform Interval: Set the time interval in seconds when the Inform message will be sent
to the ACS.
• ACS URL: Enter the web address of the ACS which is provided by your ISP.
• ACS Username/Password: Enter the username/password to log in to the ACS server.
• Interface used by TR-069 client: Select which interface to be used by the TR-069
client.