TP-Link JetStream L2 Lite TL-SG3210 - Show Spanning-Tree Global-Config; Show Spanning-Tree Port-Config

148
Syntax
show spanning-tree global-info
Command Mode
Any Configuration Mode
Example
Display the current status of Spanning Tree:
TP-LINK# show spanning-tree global-info
show spanning-tree global-config
Description
The show spanning-tree global-config command is used to display the global
configuration of Spanning Tree.
Syntax
show spanning-tree global-config
Command Mode
Any Configuration Mode
Example
Display the global configuration of Spanning Tree:
TP-LINK# show spanning-tree global-config
show spanning-tree port-config
Description
The show spanning-tree port-config command is used to display the Port
configuration of Spanning Tree.
Syntax
show spanning-tree port-config [port]
Parameter
port —— The port selected to display the configuration, ranging from 1 to 10.
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example