TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Guide

150
The show spanning-tree msti port command is used to display the Instance
Port configuration of Spanning Tree.
Syntax
show spanning-tree msti port {id} [port]
Parameter
id —— Instance ID, ranging from 1 to 8.
port —— The port selected to display the configuration, ranging from 1 to 10.
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the configuration of port 5 in Instance 1:
TP-LINK(config)# show spanning-tree msti port 1 5
show spanning-tree security tc-defend
Description
The show spanning-tree security tc-defend command is used to display TC
Threshold and TC Protect Cycle of Spanning Tree.
Syntax
show spanning-tree security tc-defend
Command Mode
Any Configuration Mode
Example
Display TC Threshold and TC Protect Cycle of Spanning Tree:
TP-LINK(config)# show spanning-tree security tc-defend
show spanning-tree security port-defend
Description
The show spanning-tree security port-defend command is used to display
the Port Protect configuration of Spanning Tree.
Syntax
show spanning-tree security port-defend [port]
Parameter

TP-Link JetStream L2 Lite TL-SG3210 Specifications

General

Model	TL-SG3210
Category	Switch
Type	Managed
Switching Capacity	20Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table	8K
Jumbo Frame	9KB
Certifications	CE, FCC, RoHS
Ports	8 x 10/100/1000Mbps RJ45 ports, 2 x 1G SFP slots
Standards and Protocols	IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s
VLAN	4K VLAN IDs
Operating Temperature	0°C~40°C (32°F~104°F)
Storage Temperature	-40°C~70°C (-40°F~158°F)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing