TP-Link JetStream L2 Lite TL-SG3210 - Show Gvrp Interface

33
TP-LINK(config)# show gvrp global
show gvrp interface
Description
The show gvrp interface command is used to display the GVRP configuration
information of the specified Ethernet ports.
Syntax
show gvrp interface [ethernet port-num]
Parameter
port-num ——The Ethernet port number. By default, the GVRP configuration
information of all the Ethernet ports isdisplayed.
Command Mode
Any Configuration Mode
Example
Display the GVRP configuration information of all the Ethernet ports:
TP-LINK(config)# show gvrp interface