TP-Link JetStream L2 Lite TL-SG3210 - Radius Accounting Primary-Ip; Radius Accounting Secondary-Ip

75
radius accounting primary-ip
Description
The radius accounting primary-ip command is used to configure the IP
address of the accounting server.
Syntax
radius accounting primary-ip ip-addr
Parameter
ip-addr —— The IP address of the accounting server.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the accounting server as 10.20.1.100:
TP-LINK(config)# radius accounting primary-ip 10.20.1.100
radius accounting secondary-ip
Description
The radius accounting secondary-ip command is used to configure the IP
address of the alternate accounting server. To restore to the default
configuration, please use no radius accounting secondary-ip command.
Syntax
radius accounting secondary-ip ip-addr
no radius accounting secondary-ip
Parameter
ip-addr ——The IP address of the alternate accounting server. By default, it is
0.0.0.0.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the alternate accounting server as 10.20.1.101: