TP-Link JetStream L2 Lite TL-SG3210 Cli Reference Guide

162
TP-LINK> show igmp-snooping port-filter 5
show igmp-snooping packet-stat
Description
The show igmp-snooping packet-stat command is used to display the Packet
Statistics information of all ports.
Syntax
show igmp-snooping packet-stat
Command Mode
Any Configuration Mode
Example
Display the Packet Statistics information:
TP-LINK> show igmp-snooping packet-stat
show igmp-snooping packet-stat-clear
Description
The show igmp-snooping packet-stat-clear command is used to clear the
Packet Statistics information of all ports.
Syntax
show igmp-snooping packet-stat-clear
Command Mode
Any Configuration Mode
Example
Clear the Packet Statistics information:
TP-LINK> show igmp-snooping packet-stat-clear

TP-Link JetStream L2 Lite TL-SG3210 Specifications

General

Model	TL-SG3210
Category	Switch
Type	Managed
Switching Capacity	20Gbps
Forwarding Rate	14.88 Mpps
MAC Address Table	8K
Jumbo Frame	9KB
Certifications	CE, FCC, RoHS
Ports	8 x 10/100/1000Mbps RJ45 ports, 2 x 1G SFP slots
Standards and Protocols	IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s
VLAN	4K VLAN IDs
Operating Temperature	0°C~40°C (32°F~104°F)
Storage Temperature	-40°C~70°C (-40°F~158°F)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing