37
TP-LINK(config)# interface link-aggregation 1
TP-LINK(config-if)# description movie server
show interfaces link-aggregation
Description
The show interfaces link-aggregation command is used to display the
configuration information of the Aggregate Arithmetic and the aggregation
groups.
Syntax
show interface link-aggregation [group-num]
Parameter
group-num ——The LAG number,ranging from1 to 14. By default, the GVRP
configuration information of all the Ethernet ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the GVRP configuration information of all the Ethernet ports:
TP-LINK(config)#show interface link-aggregation
To Next Page
Loading...
