TP-Link JetStream L2 Lite TL-SG3210 - Show Igmp-Snooping Filter-Ip-Addr; Show Igmp-Snooping Port-Filter

161
Syntax
show igmp-snooping multi-ip-list
Command Mode
Any Configuration Mode
Example
Display the Multicast IP table:
TP-LINK> show igmp-snooping multi-ip-list
show igmp-snooping filter-ip-addr
Description
The show igmp-snooping filter-ip-addr command is used to display the
Multicast Filter IP-Range table.
Syntax
show igmp-snooping filter-ip-addr
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter IP-Range table:
TP-LINK(config)# show igmp-snooping filter-ip-addr
show igmp-snooping port-filter
Description
The show igmp-snooping port-filter command is used to display the
configuration of Multicast Port Filter.
Syntax
show igmp-snooping port-filter [port-num]
Parameter
port-num —— The port selected to display the configuration of Multicast Filter,
ranging from 1 to 10. By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter configuration of port 5: