159
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Enable multicast filtering function for port 5, specify Action Mode as accept,
bound IP-range 2, 3, 4, and specify the maximum number of multicast groups
for port 5 to join in as 128:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# igmp-snooping filter status enable mode accept addr-id
2-4 maxgroup 128
show igmp-snooping global-config
Description
The show igmp-snooping global-config command is used to display the
global configuration of IGMP.
Syntax
show igmp-snooping global-config
Command Mode
Any Configuration Mode
Example
Display the global configuration of IGMP:
TP-LINK> show igmp-snooping global-config
show igmp-snooping port-config
Description
The show igmp-snooping port-config command is used to display the port
configuration of IGMP.
Syntax
show igmp-snooping port-config [port]
Parameter
port —— The port selected to display the configuration, ranging from 1 to 10.
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
To Next Page
Loading...
