TP-Link JetStream T1600G-28TS - Page 12

3
Chapter
Introduction
Chapter 4 System
This module is used to configure system properties of the
switch. Here mainly introduces:
•
System Info: Configure the description, system time and
network parameters of the switch.
• User Management: Configure the user nam
e and password
for users to log on to the Web management page with a
certain access level.
• System Tools: Manage the firmware and configuration files of
the switch.
• Access Security:
Provide different security measures for the
login to enhance the configuration management security.
Chapter 5 Switching
This module is used to configure basic functions of the switch.
Here mainly introduces:
• Port: Configure the basic features for the port.
• LAG: Configure Link Aggregation Group. L
AG is to combine a
number of ports together to make a single high-bandwidth
data path.
• Traffic Monitor: Monitor the traffic of each port.
• MAC Address: Configure the address table of the switch.
Chapter 6 VLAN This module is used
to configure VLANs to control broadcast in
LANs. Here mainly introduces:
• 802.1Q VLAN: Configure port-based VLAN.
Chapter 7 Spanning Tree
This module is used to configure spanning tree function of the
switch. Here mainly introduces:
•
STP Config: Configure and view the global settings of
spanning tree function.
• Port Config: Configure CIST parameters of ports.
• MSTP Instance: Configure MSTP instances.
•
STP Security: Configure protection function to prevent
devices from any malicious attack against STP features.
Chapter 8 Multicast
This module is used to configure multicast function of the switch.
Here mainly introduces:
•
IGMP Snooping: Configure global parameters of IGMP
Snooping function, port
properties, VLAN and multicast
VLAN.
•
MLD Snooping: Configure global parameters of MLD
Snooping function, port properties, VLAN and multicast
VLAN.
• Multicast Table:
View the information of IPv4 and IPv6
multicast groups already on the switch.
Chapter 9 Routing
The module is used to configure several IPv4 unicast routing
protocols. Here mainly introduces:
• Interface: Configure and view different types of
interfaces:
VLAN, loopback, routed port and port-channel interface.
• Routing table: Displays the routing information summary.
• Static Routing: Configure and view static routes.
• ARP: Displays the ARP information.