TP-Link JetStream T1600G-28TS - Page 13

4
Chapter
Introduction
Chapter 10 QoS
This module is used to configure QoS function to provide
different quality of s
ervice for various network applications and
requirements. Here mainly introduces:
• DiffServ: Configure
priorities, port priority, 802.1P priority and
DSCP priority.
•
Bandwidth Control: Configure rate limit feature to control the
traffic rate on each port; co
nfigure storm control feature to
filter broadcast, multicast and UL frame in the network.
•
Voice VLAN: Configure voice VLAN to transmit voice data
stream within the specified VLAN so as to ensure the
transmission priority of voice data stream and voice quality.
Chapter 11 PoE This
module is used to configure the PoE function for the switch
to supply power for PD devices. Here mainly introduces:
• PoE Config: Configure PoE function globally.
• PoE Time-Range: Configure the effective time for
PoE port to
supply power.
Chapter 12 ACL
This module is used to configure match rules and process
policies of packets to filter packets in order to control the access
of the illegal users to the network. Here mainly introduces:
• ACL Config: ACL rules.
• Policy Config: Configure operation policies.
•
ACL Binding: Bind the ACL to a port/VLAN to take its effect on
a specific port/VLAN.
•
Policy Binding: Bind the policy to a port/VLAN to take its
effect on a specific port/VLAN.
Chapter 13 Network Security
This module is used to configure the protection measures for the
network security. Here mainly introduces:
• IP-
MAC Binding: Bind the IP address, MAC address, VLAN
ID and the connected Port number of the Host together.
•
DHCP Snooping: Monitor the process of the host and record
related information.
•
ARP Inspection: Configure ARP inspection feature to prevent
the network from ARP attacks.
•
DoS Defend: Configure DoS defend feature to prevent DoS
attack.
• 802.1X: Configure c
ommon access control mechanism for
LAN ports to solve mainly authentication and security
problems.
Chapter 14 SNMP
This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network
devices. Here mainly introduces:
• SNMP Config: Configure global settings of SNMP function.
•
Notification: Configure notification function for the
management station to monitor and process the events.
•
RMON: Configure RMON function to monitor network more
efficiently.