TP-Link TL-SG2428P - Configuring DHCP VLAN Relay

Configuring DHCP Service DHCP Relay Configuration
User Guide 457
The following example shows how to configure the DHCP server address as 192.168.1.7
on VLAN interface 66:
Switch#configure
Switch(config)#interface vlan 66
Switch(config-if)#ip helper-address 192.168.1.7
Switch(config-if)#show ip dhcp relay
...
DHCP relay helper address is configured on the following interfaces:
Interface Helper address
---------- --------------
VLAN 66 192.168.1.7
Switch(config-if)#end
Switch#copy running-config startup-config
3.2.4 Configuring DHCP VLAN Relay
Follow these steps to configure DHCP VLAN Relay:
Step 1 configure
Enter Global Configuration Mode.