User Guide 807
Configuring DHCP Filter Configuration Examples
4.1.3 Using the GUI
1) Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Basic Config to load the
following page. Enable DHCPv4 Filter globally and click Apply. Select all ports, change
Status as Enable, and click Apply.
Figure 4-2 Basic Config
2) Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Legal DHCPv4 Servers
and click to load the following page. Specify the IP address and connected port
number of the legal DHCPv4 server. Click Create.
To Next Page
Loading...
