User Guide 686
Configuring ACL ACL Configuration
Figure 2-27 Viewing ACL Rules Table
Here you can view and edit the ACL rules. You can also click Resequence to resequence
the rules by providing a Start Rule ID and Step value.
2.1.4 Configuring ACL Binding
You can bind the ACL to a port or a VLAN. The received packets on the port or in the VLAN
will then be matched and processed according to the ACL rules. An ACL takes effect only
after it is bound to a port or VLAN.
Note:
•
Different types of ACLs cannot be bound to the same port or VLAN.
•
Multiple ACLs of the same type can be bound to the same port or VLAN. The switch matches
the received packets using the ACLs in order. The ACL that is bound earlier has a higher
priority.
Binding the ACL to a Port
Choose the menu SECURITY > ACL > ACL Binding > Port Binding and click to load
the following page.
To Next Page
Loading...
