TP-Link TL-SG2428P - Example for Ipv6 Source Guard; Network Requirements

User Guide 786
Configuring IPv6 IMPB Configuration Examples
U Host IP-Addr MAC-Addr VID Port ACL SOURCE
- ---- ------- -------- --- ---- --- ------
1 User1 2001::5 74:d3:45:32:b6:8d 1 Gi1/0/1 ND-D Manual
1 User2 2001::6 88:a9:d4:54:fd:c3 1 Gi1/0/2 ND-D Manual
Notice:
1.Here, ‘ND-D’ for ‘ND-Detection’,and’IP-V-S’ for ‘IP-Verify-Source’.
Verify the global configuration of ND Detection:
Switch_A#show ipv6 nd detection
Global Status: Enable
Verify the ND Detection configuration on VLAN:
Switch_A#show ipv6 nd detection vlan
VID Enable status Log Status
---- ------------- ----------
1 Enable Disable
Verify the ND Detection configuration on ports:
Switch_A#show ipv6 nd detection interface
Interface Trusted LAG
--------- ----------- ---
Gi1/0/1 Disable N/A
Gi1/0/2 Disable N/A
Gi1/0/3 Enable N/A
...
5.2 Example for IPv6 Source Guard
5.2.1 Network Requirements
As shown below, the legal IPv6 host connects to the switch via port 1/0/1 and belongs to
the default VLAN 1. It is required that only the legal host can access the network via port