User Guide 718
Configuring ACL Configuration Example for ACL
■ Binding Configuration
Bind the Combined ACL to port 1/0/2 so that the ACL rules will be applied to the computer
of the network administrator and the devices which are restricted to Telnet connection.
Demonstrated with T1600G-28TS, the following sections explain the configuration
procedure in two ways: using the GUI and using the CLI.
3.3.3 Using the GUI
1) Choose the menu SECURITY > ACL > ACL Config and click to load the following
page. Then create a Combined ACL for the marketing department.
Figure 3-24 Creating an Combined ACL
2) Click Edit ACL in the Operation column.
Figure 3-25 Editing Combined ACL
3) On the ACL configuration page, click .
To Next Page
Loading...
