TP-Link TL-SG2428P - Configuring the Device Description

User Guide 30
Managing System System Info Configurations
Gi1/0/3 LinkUp 1000M Full Disable Disable Copper
...
Switch#show system-info
System Description - JetStream 48-Port Gigabit Smart Switch with 4 SFP Slots
System Name - T1600G-52TS
System Location - SHENZHEN
Contact Information - www.tp-link.com
Hardware Version - T1600G-52TS 3.0
Software Version - 3.0.0 Build 20171129 Rel.38400(s)
Bootloader Version - TP-LINK BOOTUTIL(v1.0.0)
Mac Address - 00-0A-EB-13-23-A0
Serial Number -
System Time - 2017-12-12 10:10:37
Running Time - 1 day - 2 hour - 11 min - 30 sec
2.2.2 Configuring the Device Description
Follow these steps to configure the device description:
Step 1 configure
Enter global configuration mode.
Step 2 hostname [ hostname ]
Specify the system name of the switch.
hostname : Enter the device name. The length of the name ranges from 1 to 32 characters. By
default, it is the model name of the switch.
Step 3 location [ location ]
Specify the system location of the switch.
location : Enter the device location. It should consist of no more than 32 characters. By default,
it is “SHENZHEN”.
Step 4 contact-info [ contact-info ]
Specify the system contact Information.
contact-info : Enter the contact information. It should consist of no more than 32 characters.
By default, it is “www.tp-link.com”.