Configuring LAG LAG
User Guide 105
1
LAG
1.1 Overview
With LAG (Link Aggregation Group) function, you can aggregate multiple physical ports into
a logical interface, increasing link bandwidth and providing backup ports to enhance the
connection reliability.
1.2 Supported Features
You can configure LAG in two ways: static LAG and LACP (Link Aggregation Control
Protocol).
Static LAG
The member ports are manually added to the LAG.
LACP
The switch uses LACP to implement dynamic link aggregation and disaggregation by
exchanging LACP packets with its peer device. LACP extends the flexibility of the LAG
configuration.
To Next Page
Loading...
