User Guide 738
Configuring IPv4 IMPB IP-MAC Binding Configuration
VLAN ID: 5
Switch(config-if)#show ip dhcp snooping interface gigabitEthernet 1/0/1
Interface max-entries LAG
--------- ----------- ---
Gi1/0/1 100 N/A
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.3 Viewing Binding Entries
On privileged EXEC mode or any other configuration mode, you can use the following
command to view binding entries:
show ip source binding
View the information of binding entries, including the host name, IP address, MAC address, VLAN ID, port
number and protect type.
To Next Page
Loading...
