Installation / Preparation for Commissioning
TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany
Page 64 of 92 TR - ELA - BA - DGB - 0015 - 13 04/23/2020
4.1 Connection
Flange socket M12x1-4 pin D-coded
Pin 1 TxD+, transmitted data +
Pin 2 RxD+, received data +
Pin 3 TxD–, transmitted data –
Pin 4 RxD–, received data –
Flange socket M12x1-4 pin D-coded
Pin 1 TxD+, transmitted data +
Pin 2 RxD+, received data +
Pin 3 TxD–, transmitted data –
Pin 4 RxD–, received data –
Flange connector M8x1-4 pin or M12x1-4
Pin 1 19 – 27 V DC
Pin 2
1)
TRWinProg+
Pin 3 GND, 0 V
Pin 4
1)
TRWinProg–
Shielded twisted pair cables must be used for the supply !
Order data for Ethernet flange socket M12x1-4 pin D-coded
SACC-M12MSD-4CON-PG 7-SH (PG 7)
SACC-M12MSD-4CON-PG 9-SH (PG 9)
1)
for service purposes, e.g. software update