Trail Tech Voyager User Manual

15Trail Tech Voyager
The ignition
sensor detects
the on/off status
of the engine.
When the
engine is shut
off, Voyager will
know to go to
sleep for power
conservation.
Connect the power cable directly to the vehicle’s
12 volt battery. Alternately tap into the electrical
system (preferably not
interrupted by the key
switch.) Voyager is
polarity independent.
Power Wire
For air-cooled machines.
In-line in
radiator hose
for water-cooled
machines.
Physical Features » Power and Temperature Sensors
Vehicle Power: Temperature Sensors:
Radiator Hose
Sensor:
Cylinder Head Sensor:
Spark Plug
CHT
Temperature
Sensor
Radiator
Hose
Radiator
Hose
Temperature
Sensor
Ignition Sensor:
Ignition
Sensor
Wrap
Coil
Spark Plug
See model-specific instructions for mounting
procedure.

Trail Tech Voyager Specifications

General

Display Size	2.7 inches
Water Resistance	IP67
GPS Receiver	High-sensitivity
Mounting	Handlebar Mount
Data Logging	Yes
Memory	8 MB
Sensors	GPS, Temperature
Power Source	Lithium-ion battery
Routes	10