Trail Tech Voyager User Manual

18 Trail Tech Voyager
Motorcycle wheel sensors, like ATVs, need a magnet
placed on the spinning part of the wheel and the
sensor installed to a non-spinning area.
The magnet gets bolted or glued to the brake rotor.
The wheel sensor should be cable-tied to the brake
line, then attached to the brake caliper.
Voyager can tell precisely how far and fast it’s
traveled by how many times the magnet passes the
sensor.
Many Motorcycles and ATVs have special
installation procedures. Refer to the model-specific
instructions for more information.
Physical Features » Precision Wheel Sensor
Motorcycle Wheel Sensor Installation:
Magnet Rotation Path
Magnet Passing Under Sensor

Trail Tech Voyager Specifications

General

Display Size	2.7 inches
Water Resistance	IP67
GPS Receiver	High-sensitivity
Mounting	Handlebar Mount
Data Logging	Yes
Memory	8 MB
Sensors	GPS, Temperature
Power Source	Lithium-ion battery
Routes	10