Trail Tech Voyager User Manual

30 Trail Tech Voyager
On the reset menu, you can erase the current
ride, or reset the Trip DST/stopwatch counters.
Resetting ride memory erases all tracks, routes,
and waypoints currently in internal memory.
Note that Voyager is unable to erase data from
the MicroSD
card; if you
need to free
up space, do
so on your
PC.
Resets:
Ride Menu > Resets
Import/Export allows you to save to or load
files from the MicroSD card. By default both
tracks and routes import as routes (grey lines)
so that you can log tracks (black lines) over
them. In the import settings you can change
this behavior. (i.e. you want roads to import as
tracks and trails as routes, to tell the difference.)
Import/Export:
Ride Menu > Import/Export
Ride Menu > Import/Export > Import Settings
Ride Menu > Import/Export > Export Settings
Menu » Ride Menu

Trail Tech Voyager Specifications

General

Display Size	2.7 inches
Water Resistance	IP67
GPS Receiver	High-sensitivity
Mounting	Handlebar Mount
Data Logging	Yes
Memory	8 MB
Sensors	GPS, Temperature
Power Source	Lithium-ion battery
Routes	10