Trail Tech Voyager User Manual

5Trail Tech Voyager
• Do not plug Voyager directly into a wall outlet
except with a Trail Tech wall charger.
• Read all instructions before using Voyager.
• Avoid contact with gasoline, degreasers or
other chemical cleaners.
• Do not wash with pressure washer.
• When installing Voyager, disconnect the
vehicle battery.
• When installing radiator hose temperature
sensors, make sure it fits BEFORE cutting the
radiator hose.
PAY ATTENTION TO THE TRAIL!
Precautions
WARNING:
• Check gap between wheel sensor and magnet
periodically.
• Do not bend, twist, kink or abuse the sensor
cables.
• To reduce the risk of damage, do not
disassemble Voyager or its accessories.
• Do not operate Voyager while driving.
• Do not rely on Voyager for operations requiring
absolutely precise measurements of distance
or direction. All GPS devices inherently contain
some amount of error. Use the wheel sensor for
the most precise data.
Precautions

Trail Tech Voyager Specifications

General

Display Size	2.7 inches
Water Resistance	IP67
GPS Receiver	High-sensitivity
Mounting	Handlebar Mount
Data Logging	Yes
Memory	8 MB
Sensors	GPS, Temperature
Power Source	Lithium-ion battery
Routes	10