Need help?Do you have a question about the Trane 7½ - 20 Tons and is the answer not in the manual?
All cabinets are standardized for consistent component location for servicing.
Details on filter types and sizes for air handlers, including conversion options.
Features of 7.5-20 ton single and dual compressor condensing units.
Discusses flexibility of air handlers for various installations and features.
Lists accessories for air handler versatility and installation.
Highlights reduced installation costs due to factory-packaged components and controls.
Importance of maintaining recommended clearances for unit operation and serviceability.
Describes the field rotation of air handler blower sections for airflow pattern changes.
Discusses unit operation at low ambient temperatures and the need for head pressure control.
Steps to calculate and size equipment for building cooling loads.
Steps to calculate building heating load and size equipment, including supplementary heaters.
Procedure for selecting fan motor based on airflow and static pressure.
Breakdown of Trane's split system heat pump model number coding.
Breakdown of Trane's air handler model number coding.
Data for low static fan drive options for 5-ton air handlers.
Data for low static fan drive options for 7.5-ton air handlers.
Data for low static fan drive options for 10-ton air handlers.
Data for low static fan drive options for 15-ton air handlers.
Airflow specifications for electric heater discharge plenums and grilles.
RPM specifications for oversized motors and sheave positions.
Static pressure drop values for various air handler accessories.
BTUH output and kW input for auxiliary electric heaters in different stages.
Types of thermostats available for two-stage or single-stage heating/cooling.
Details on programmable electronic and digital display thermostats with various features.
Information on remote sensors and outdoor thermostats for system control.
Unit operating voltage, minimum circuit ampacity, and fuse/breaker size for heat pumps.
Motor FLA, LRA, voltage, phase, and amps for compressor and condenser fans.
Wiring details including voltage, ampacity, and fuse/breaker size for air handlers.
FLA, LRA, voltage, phase, and amps for standard and oversized evaporator fan motors.
Illustrates jobsite wiring connections for different Trane heat pump and air handler models.
Dimensions for discharge plenums and grilles used with electric heat.
Dimensions for discharge plenums and grilles without electric heat.
Net weights for various accessories like isolators, coil guard, and thermostat.
General unit assembly, casing, and operating range details for heat pumps.
Details on single and dual compressor systems, coils, fans, motors, and controls.
Information on defrost controls, low ambient operation, and available accessories.
Assembly, casing construction, insulation, and knockout details for air handlers.
Details on refrigeration circuits, coils, fans, and controls for air handlers.
Information on air handler controls, filters, and available accessories.
Availability of oversized motors for high static pressure applications.
Details on standard, programmable, and outdoor thermostats for unit control.
To Next Page
General
