10 CG-SVX17D-EN
Model Number Description
Digit 38 Short Circuit
Rating
A Default A Short Circuit
Rating
B High A Short Circuit Rating
Digit 39 — Installation
Accessories
X No Installation
Accessories
1 Elastomeric Isolators
Digit 40 Water Strainer
A With Water Strainer
Factory- Installed
Digit 41 Sound Attenuator
Package
3 Super Quiet
5 Comprehensive Acoustic
Package
Digit 42 Appearance
Options
X No Appearance Options
A Architectural Louvered
Panels
B Half Louvers
Digit 43 Exterior Finish
1 Standard Paint
Digit 44 Label and
Literature Language
BSpanish
D English
E French and English
Digit 45 - Not Used
X
Digit 46 Shipping Package
X No Skid (Standard)
A Unit Containerization
Package
Digit 47 Performance Test
Options
X No Performance Test
2 1 Point Test with Report
3 Witness 1 Point Test with
Report
Digit 48 Flow Switch Set
Point
C15
F 35
H45
L60
Digit 49 - Not Used
X
Digit 50 Specials
XNone
SSpecial
Note: If a digit is not defined it may be held for future use.
Compressor Nameplate
The compressor nameplate provides the following information:
• Compressor model number.
• Compressor serial number.
• Compressor electrical characteristics.
• Utilization Range.
• Recommended refrigerant.
Model Number Coding System
The model numbers for the unit and the compressors are comprised of numbers and
letter which represent features of the equipment.
Each position, or group of positions, in the number is used to represent a feature. For
example, Unit Voltage, contains the number “F”. From the chart, it can be seen that a “F”
in this position means that the unit voltage is 460/60/3.
To Next Page
Loading...
Need help?
General