80 CG-SVX17D-EN
Installation - Electrical
Control Power Supply
The unit is equipped with a control power transformer; it is not necessary to provide additional
control power voltage to the unit. No other loads should be connected to the control power
transformer.
All units are factory-connected for appropriate labeled voltages.
Table 34. Power Entrance
Incoming
Power
Incoming
Power
Incoming
Power
Low Voltage
Power
Low
Voltage
Power
Low
Voltage
Power
“V” Configuration 40-70 Ton
“Slant” Configuration 20-35 Ton
“W” Configuration 80-130 Ton
To Next Page
Loading...
