124 CG-SVX17D-EN
Controls Interface
Power Up and Self Tests
Power-Up DynaView
On Power-Up DynaView will progress through three screens:
First Screen, Application Status, Boot Software P/N, Self Test and Application Time Stamp.
Compressor B Starts: XXXX Integer
Compressor B Running Time: XXXX:XX hr:min
Compressor C Starts: XXXX Integer
Compressor C Running Time: XXXX:XX hr:min
Table 55. Report name: System ASHRAE Chiller Log
Description Resolution Units
Current Time/Date: XX:XX mmm dd, yyyy Date / Time
Chiller Mode: Enum
Active Chilled Water Setpoint: XXX.X Temperature
Active Hot Water Setpoint: XXX.X Temperature
Evap Entering Water Temp: XXX.X Temperature
Eva p L e a v i n g Wat er Tem p : XX X. X Temp e rat ur e
Evap Water Flow Switch Status: Enum
Outdoor Air Temperature: XXX.X Temperature
Active Demand Limit Setpoint: XXX Percent
Table 56. Report name: Circuit ASHRAE Chiller Log
Description Resolution Units
Circuit Mode: Enum
Suction Pressure: XXX.X Pressure
Suction Saturated Rfgt Temp: XXX.X Temperature
Evap Approach Temp: XXX.X Temperature
Discharge Pressure: XXX.X Pressure
Discharge Saturated Rfgt Temp: XXX.X Temperature
Cond Approach Temp: XXX.X Temperature
Compressor A Starts: XXXX Integer
Compressor A Running Time: XX:XX Hours: Minute
Compressor B Starts: XXXX Integer
Compressor B Running Time: XX:XX Hours: Minute
Compressor C Starts: XXXX Integer
Compressor C Running Time: XX:XX Hours: Minute
Table 54. Report name: Circuit Compressor
Description Resolution Units
To Next Page
Loading...
