INSTRUCTION MANUAL
UG30 CONTROL
mP30-UG30 - Rev. 1.5 - Date: 18-03-2004 EN
9 (44)
LAY-OUT OF CP1 CIRCUIT
The CP******** electronic card has been designed to
control the immersed-electrodes OEM KUE* humidifiers.
Since the CP********* card is uncovered, it must be
installed so as to avoid any accidental contact with
people during
normal operating conditions and to prevent the danger of
possible high tension or high temperature points.
As to installation refer to the user manual of the
immersed-electrodes OEM series.
To Next Page
Loading...
Need help?
General
