Trane mP30 - CHANGING THE PASSWORD

INSTRUCTION MANUAL
UG30 CONTROL
mP30-UG30 - Rev. 1.5 - Date: 18-03-2004 EN
27 (44)
EXAMPLE: modification of parameter
3 (delivery air presence "B4").
(press
simultaneously
0
FP
….
2
3
.
9
°C
%rH
53
for 5 seconds)
….
**
FP
**: ask your nearest technical service centre for the FACTORY password
Prob
0
1
….
0
3
0
3
1
3
1
3
2
3
.
9
°C
%rH
53
Meaning of symbol
shown on the display:
- on with steady light: access to masks is in read only mode;
- on and flashing
: access to masks is in programming mode;
CHANGING THE PASSWORD
The password for all FACTORY parameters can not be modified; the password of the USER parameters can be
modified through parameter HH.
GLb GENERAL
Minimum Maximum Default
HH
USER Password 0 200
(**)
(**) the USER password is contained in the sealed envelop enclosed with the Instruction Manual.