Trane TR200 - Page 44

[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
0-13 Readout: Linked Set-ups
Array [5]
Range: Function:
0 N/A* [0 - 255 N/A] View a list of all the set-ups linked by means of par.0-12
This Set-up
Linked to. The parameter has one index for each parameter set-up. The
parameter value displayed for each index represents which set-ups are
linked to that parameter set-up.
Index
keypad value
0 {0}
1 {1,2}
2 {1,2}
3{3}
4 {4}
Table 4. 2: Example: Set-up 1 and Set-up 2 are linked
0-14 Readout: Prog. Set-ups / Channel
Range: Function:
0 N/A* [-2147483648 -
2147483647 N/A]
View the setting of par.0-11
Programming Set-up for each of the four
different communication channels. When the number is displayed in
hex, as it is in the keypad, each number represents one channel.
Numbers 1-4 represent a set-up number; ‘F’ means factory setting; and
‘A’ means active set-up. The channels are, from right to left: keypad, Ad-
justable Frequency Drive bus, USB, HPFB1.5.
Example: The number AAAAAA21h means that the Adjustable Frequen-
cy Drive bus selected Set-up 2 in par.0-11
Programming Set-up, the
keypad selected Set-up 1 and all others used the active set-up.
0-2* keypad Display
Define the variables displayed in the Graphical Local Control Panel.
NOTE
Refer to par.0-37 Display Text 1, par.0-38 Display Text 2 and par.0-39 Display Text 3 for information on how to write
display texts.
0-20 Display Line 1.1 Small
Option: Function:
Select a variable for display in line 1, left position.
[0] None No display value selected
Parameter Description
TR200 Programming Guide 4-7