Trane TR200 - Remote Programming with Trane Drive Utility (TDU)

5.6 Remote Programming with Trane Drive
Utility (TDU)
Trane has a software program available for developing,
storing, and transferring frequency converter
programming. The Trane Drive Utility (TDU) allows the user
to connect a PC to the frequency converter and perform
live programming rather than using the LCP. Additionally,
all frequency converter programming can be done off-line
and simply downloaded to the frequency converter. Or the
entire frequency converter profile can be loaded onto the
PC for back up storage or analysis.
The USB connector or RS-485 terminal are available for
connecting to the frequency converter.
Programming TR200 D-Frame Operating Instructions
48
BAS-SVX54B-EN