Traub TNX65 - Preparing to Transport a Machine Without Milling Unit Preparing to Transport a Machine Without Milling Unit; Close Open Hose or Pipe Lines; Corrosion Protection

19
22.10.2021
TNX65/42
Preparing to transport a machine without milling unit
Close open hose or pipe lines
To prevent any remaining cutting oil or lubricoolant dripping from the lines, the
open hose lines and pipes must be sealed with plugs.
Corrosion protection
Before delivery, all machines are coated to protect them from corrosion. This
corrosion protection must be renewed accordingly whenever the machine is
subsequently transported again.
Details on corrosion protection can be found in the documentation
Notes on Operating Materials.