35
22.10.2021
TNX65/42
Installing the machine
Installing the machine by crane
Danger due to falling machine / parts
Ensure there is no-one underneath the suspended load!
Beware of being crushed
The installation site must be selected in such a way that there is
no risk of anyone or anything being crushed against walls, pillars or
hall installations by moving parts or the machine, including manually
operated doors and flaps, etc.
Remove wooden planks
When delivered, the machine is positioned on and screwed to two wooden
planks.
• Lift the machine by crane and secure it with suitable supports.
• Unscrew the wooden planks.
Ensure that the four wheels on the control cabinet have been
screwed in completely.
• Lift the machine (remove the supports) and slowly lower it onto the feet.
To Next Page
Loading...