Page 45
1-2
General Information and Operating Instructions
PUSHBACK TRACTOR CHALLENGER550
Jan 28/19
INFORMATION
Also observe the information on stationary regeneration in the manufacturer's operating manual
(DEUTZ TCD 7.8 L6).
(1)
Park the CHALLENGER550 on an even, clean, and solid surface.
(2) Apply the parking brake.
(3) Shift the transmission to neutral.
(4) Run the engine at idle speed.
(5) Allow the engine to run warm until a coolant temperature of at least 75 ¬×C has been reached.
(6) Place chocks under the rear wheels.
Figure 25: Starting the stationary regeneration
0
0
-100
-100 -50
-50
[km/h]
0
10
20
30
40
0
0%
Property of American Airlines
To Next Page
Loading...
